Kohler STERLING 7109 Serie Guia De Instalacion página 4

2" (5.1 cm) Minimum
Drain Hole Clearance
through Wall for AFD
Version.
8" (20.3 cm)
4" (10.2 cm)
Roughing-In
A
71090110 60"
(152.4 cm)
71090112 60"
(152.4 cm)
IMPORTANT! All dimensions are nominal. The stud opening tolerance is plus 1/4" (6 mm) and minus 0.
Carefully measure your fixture before determining enclosure size. When a fire rated wall is specified,
dimensions are to the inside of the wall board. Some shimming between the stud frame and the fixture
may be required. Dimensions given in the roughing-in information are crucial for proper installation.
Construct the framing and plumbing accurately.
NOTE: If a firewall is required, roughing-in dimensions will have to increase according to the thickness of
the firewall material. Stud opening dimensions must be measured toward the exposed side of the wall
material.
NOTE: If installing this unit to a masonry wall, make provisions for plumbing connections. Construct a
separate frame wall a minimum of 6" (15.2 cm) from the masonry wall.
1. Prepare the Site (Framing Construction)
Refer to the Roughing-In section for dimensions.
Carefully measure your fixture before determining enclosure size. Some shimming between the stud
frame and the fixture may be required. Dimensions given in the Roughing-In section are crucial for
proper installation. Construct the framing and plumbing accurately.
1021858-2-E
30" (76.2 cm) 30" (76.2 cm)
14"
14"
(35.6 cm)
(35.6 cm)
Drain
Cutout
D
3-1/2"
(8.9 cm)
2" (5.1 cm)
B
D. Drain
A
Recommended Support
Clip or Roofing Nail
Location (5 Total)
Diagrams shown are representative and for use with the table only.
Your fixture may appear different from the illustrations.
B C
8-3/4" 31-1/2"
(22.2 cm) (80 cm)
8-3/4" 31-1/2"
(22.2 cm) (80 cm)
D
6" H
(15.2 cm)
G
C
D E
14-1/4" 73-1/2"
(36.2 cm) (186.7 cm)
14-1/4" 75-3/4"
(36.2 cm) (192.4 cm)
4
A
B
F G
N/A 22-1/4"
(56.5 cm)
3" 22-1/4"
(7.6 cm) (56.5 cm)
C
E
F
H
8"
(20.3 cm)
8"
(20.3 cm)
Sterling