Forgot Your Password; Reset To Factory Defaults - Buffalo DriveStation HD-LXU3 Manual Del Usuario

4

Forgot your password?

If your DriveStation is in encrypted mode and you forget the password, follow the
procedure below to reset the unit back to it's default settings.
Note: A Windows computer is required to reset this drive. The Secure Lock
Manager Easy software does not support Mac OS.

Reset to factory defaults

Restoring your drive to factory defaults will erase all data and passwords on the drive. To
access data on an encrypted drive, you must enter the correct password.
After resetting to factory defaults, the drive will be formatted in NTFS. If you want to be able
to use Mac OS, reformat the drive with Mac OS extended after resetting to factory defaults.
1
Connect the drive to your computer.
If the password authentication screen is displayed, enter your password.
Note: If you forget your password and reset the unit to the factory defaults, close the screen.
2
Click [Star t] - [(All) Programs] - [BUFFALO] - [SecureLockManagerEasy] -
[SecureLockManagerEasy].
3
Click [Reset to the factory defaults].
HD-LXU3 User Manual
11