TESY CN205EASLFR Instrucciones De Uso página 4

•
At initial operation of the appliance and when the
EN
appliance has not been used for a long time, it is possible
some odour or smoke to be emitted. These emissions will
disappear after a short period of appliance operation.
Moving the appliance:
If it is necessary to move the appliance, turn it off by
the major switch, unplug the power cord and move it with
your both hands to its new place, having ensured it has
cooled off. Moving hot appliances may lead to undesired
consequences to the user such as burning one's skin or
inflammable materials getting on the appliance.
OPERATION OF THE APPLIANCE
Connect the appliance to a safe power socket, then
1.
push the switch into position I
Push the control panel buttons or use the remote
2.
control in order to set the heating;
Push button
3.
ready-for-operation ("Ready") mode
Push button
4.
- comfort mode 2000W
that the panel heater operates at 2000W
- economy mode 1000W
that the panel heater operates at 1000W
- ECO mode
- anti-freezing mode
the panel heater is in anti-freezing operating
mode - fixed at 8°C
In heating mode on the LCD screen will appear the icon
, while in anti-freezing mode it won't be displayed.
Temperature Setting
5.
- Push button
15°С to 50°С. This setting will be saved and will
be confirmed in 10 seconds
- When ambient temperature becomes equal to
the preset temperature, the panel heater will
switch automatically from comfort to economy
operating mode;
- When ambient temperature is 2°С higher than the
preset temperature, the panel heater will stop heating;
- When ambient temperature is 5°С lower than
the preset temperature, the panel heater will go
into comfort operating mode.
Having finished the temperature setting, the
appliance displays the ambient temperature.
Timer Setting:
6.
- Push button
set the desired time from 0 to 24 hours; in timer
operating mode the button
will be saved and will be confirmed in 10 seconds;
- When setting the timer in "Ready" mode – the
appliance will turn on after the preset time;
- When setting the timer in Heating mode – the
appliance will turn off after the preset time.
4
Usage and Storage Instructions
– the panel heater goes into
, in order to set :
– blinking indicates
- blinking indicates
- fixed at 21°C
- blinking indicates that
using the buttons
set the temperature in the range from
using the buttons
blinks. This setting
EXAMPLE:
•
In "Ready" mode – if you set the timer to 01:00, it
means that after 1 hour the panel heater will turn
itself on automatically and will start heating;
•
In Heating mode – if you set the timer to 01:00, it
means that after 1 hour the panel heater will turn
itself off automatically;
•
Warning: The above-mentioned operations can be
also carried out by the remote control unit.
SAFETY DEVICE
Your appliance is equipped with a safety device, which can
turn the heater off in case of overheating. If the safety device
cuts in, please disconnect the appliance and let it cool down
completely. Check whether the inlet and outlet openings are
blocked up. Then try to switch on the appliance again; if it still
does not work, contact an authorized local service organization.
CLEANING
•
It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait until it
cools down after disconnecting it from the power socket.
•
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
•
Never immerse the appliance into water – there is
danger to your life from electric shock!
•
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.
STORAGE
•
Before putting away the panel heater let it cool
down after disconnecting it from the power socket.
•
Use the original packing for storing the panel heater
if it will not be used for a certain period of time. The
product can be protected from excessive dust and
dirt when it is kept in its original packing.
•
Never put a hot appliance into its packing!
•
The product has to be stored at a dry place away
from direct sunlight.
•
It is explicitly forbidden to store the appliance in
wet or damp premises.
TECHNICAL CHARACTERISTICS OF THE
APPLIANCE:
Model Rated power
CN205EASLFR 2000W
Warning: in order to avoid
overheating, do not cover the appliance!
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
Rated voltage Rated fre-
quency
230V~ 50Hz