Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Fitting Kit
K325
Pull rubber pad back slightly and insert
location peg into the rear position on the
metal loadplate. Peg will click into place.
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 4/8") (unless otherwise stated).
Crossbar can be positioned anywhere along
the roof rail.
Make sure there is no interference between
what you intend to carry with aerials, sunroof
or tailgate.
Ensure location peg engages the inner side
of the rails.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Ensure that the crossbar is adjusted evenly
at both ends.
6
Publicidad
