Horizon Global 76144 Instrucciones De Instalación página 4

1. Loosen wheel well liners - use 8 mm and 10 mm socket to remove (3) screws and (1) plastic flange nut from wheel well liners each side.
2. Enlarge access hole – peel off (3) plastic covers from holes on the frame rails each side, see Figure 2. Locate the rearmost hole and use die grinder to
enlarge the hole size big enough to feed the bolt and spacer each side, see Figure 2. NOTE: for the models with factory tow hook, use 21 mm socket to
remove M14 bolts in these locations and save them for reinstallation
©2017 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 15 76144NP 10-31-17 Rev. B