Midwest ConTour 818 Instrucciones De Armado página 2

5.
To secure the door panel to the top panel, gently
pull forward on the door panel while pushing down
on the top panel. Then fit the hooks over the end
wire on the top. Repeat with the end panel.
Note: Sizes 42" and 48" have a "U-Wire" on the top
panel that hooks over the end panel. Sizes 24", 30",
36" have a "U-Wire" on the top panel that rests on
top of the end panel. Sizes 18" and 22" do not need
a U-Wire.
6.
Secure the plastic pan inside the crate by hooking
the pan stop up over the bottom wire of the front
panel.
7.
To disassemble, reverse this process.
To Open:
Disengage the slide-bolt latch. Grab the wire in
the center of the door and lift the door upward so
the notch clears the LapLock, then swing open.
To Close:
Swing the door back toward the crate. Grab the
wire in the center of the door, lift the door upward,
and push the door firmly against crate before
lowering, securing the door's far right vertical wire
behind the LapLock. Engage the slide-bolt latch.
LapLock
Notch
Size 18" - 30" LapLock Detail
5
6
LapLock
Notch
Size 36" - 48" LapLock Detail
U-Wire for Sizes
24", 30", 36"
U-Wire for Sizes
42", 48"
2