Care And Maintenance - Britax B-SAFE 35 Elite Guia Del Usuario

BRITAX Child Safety, Inc.
Incompatible Vehicle Seat Belts
Vehicle seats and seat belts differ from vehicle to vehicle�
Refer to your vehicle owner's manual for specific information
about your vehicle seat belts and their use with child seats�
The following types of vehicle seat belts are NOT
compatible with this child seat. If any of the belt types
listed below are in the chosen seating position, choose
another vehicle seating position or check your vehicle
owner's manual for information on installing a car seat in
your vehicle.
Lap belts with a sewn-in
latch plate that have a
retractor that locks only
in case of a sudden stop.
Lap-shoulder belts with
top or bottom anchor
points on the vehicle door.
NOTE: This BRITAX car seat may not be compatible with
every inflatable lap-shoulder belt. See FAQs in the support
section of the BRITAX website (www.britaxusa.com/support)
for additonal instructions.
38
Lap belts forward of
the vehicle seat bight.
Motorized, automatic
vehicle seat belts.

Care and Maintenance

Removing the Cover
1. Remove the canopy.
a. Unhook the elastic,
and push the button.
b. Lift up the canopy
from both sides.
2. Remove the buckle and
belly pad. See pages 31-
32.
3. Detach the hook and loop
fasteners from around the
harness straps and remove
the head restraint cover.
4. Pull the easy remove cover
tab to loosen the seat
cover.
B-SAFE 35 ELITE User Guide
39