Cycle Modifier Buttons - LG DLEX9500 Manual Del Usuario

Cycle Modifier Buttons

SENSOR DRY cycles have preset settings that are
selected automatically. MANUAL DRY cycles have
default settings, but you may also customize the
settings using the cycle modifier buttons.
Press the button for that option to view and select other
settings.
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
drY leVel
Selects the level of dryness for the cycle. Press the DRY
LEVEL button repeatedly to scroll through available
settings.
• This option is only available with SENSOR DRY cycles.
• The dryer will automatically adjust the cycle time.
Selecting MORE or VERY increases the cycle time, while
LESS or DAMP decreases the cycle time.
• Use a LESS or DAMP setting for items that you wish to
iron.
temp.
Adjusts the temperature setting from ULTRA LOW
to HIGH. This allows precise care of your fabrics and
garments. Press the TEMP. button repeatedly to scroll
through available settings.
tIme drY
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles. Use the MORE TIME/
LESS TIME buttons to add or reduce the drying time in
1-minute increments.
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain
option buttons also feature a special function (see the
following page for details) that can be activated by
pressing and holding that option button for 3 seconds.
to add cycle options to a cycle:
1. Turn on the dryer and press the cycle selector buttons
repeatedly to select the desired cycle.
2. Use the cycle modifier buttons to adjust the settings
for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message is shown in
the display.
4. Press and hold the Start button to start the cycle. The
dryer starts automatically.
sIgnal
Adjusts the volume or turns off the button sounds and
end of cycle melody. Press the button repeatedly until
the desired volume setting is illuminated.
37
OPERATION