Assembly - Head Board Bracket - GLIDEAWAY Comfort Base Lifestyle Serie Manual De Instrucciones

Assembly - Head Board Bracket

Assembly - Head Board Bracket
Headboard brackets may not be standard with purchase of adjustable base and can be
IMPORTANT: The head board bracket must be assembled to the base AFTER the bed
purchased separately.
base has been completely assembled. After assembling the bed according to the
IMPORTANT: The head board bracket must be assembled to the base AFTER the bed
owner's manual, see this sheet to assemble the head board bracket.
base has been completely assembled. After assembling the bed according to the
What is Included?
owner's manual, see this sheet to assemble the head board bracket.
Unpack the kit and make sure the following is included:
Unpack the kit and make sure the following is included:
Bed Attachment
PART A
Qty: 2
M8 Bolt
PART E
Qty: 4
1
1
Completely raise the head
Completely raise the
section of the bed to access the
headsection of the bed
frame to which the headboard
to access the frame to
bracket will mount. Identify the
which the headboard
two threaded holes that will be
bracket will mount.
used to mount bed attachment
Identify the two thread-
( Part A) in Step #2.
ed holes that will be used
to mount bed attach-
ment ( Part A) in Step #2
2
2
Line up the holes in the
Line up the holes in the bed
bed attachment (Part A)
attachment (Part A) with the
with the two threaded
two threaded holes on the bed
holes on the bed base.
base. Insert two screws (Part
Make sure the horizontal
D) provided with the kit into
tting of the bed attach-
the threaded holes and tighten
ment (Part A) points
with the Allen key (Part H)
towards the inside of the
provided with the kit.
bed. Insert two screws
(Part D) provided with the
kit into the threaded holes
and tighten with the Allen
key (Part H) provided with
the kit.
Horizontal Shaft
PART B
Qty: 2
M8 Nut
PART F
Qty: 4
Fig. 1
Fig. 2
Fig. 2
Line up the holes in the bed attachment (Part A) with
9
the two threaded holes underneath the bed base.
Head Board Attachment Plate
PART C
Qty: 2
Washer 10 Zinc
PART G
Qty: 4
PART D
PART D
M8x16mm Hex Bolt
PART D
Qty: 8
Allen Key
PART H
Qty: 1
PART A
PART A