Assembly - Base - GLIDEAWAY Comfort Base Lifestyle Serie Manual De Instrucciones

ASSEMBLY - BASE

It is HIGHLY recommended to use two people for the installation of this product. To
assemble, please perform the following steps:
1
2
To Control Box
Locking Clips
3
Carefully lift the base frame from the
shipping carton, keeping the unit top-
side-down. Remove the plastic wrapping
from the bottom to access the base.
Insert one end of the DC cord into the
power supply. Insert the other ends with
locking clips into the Control Box and USB
Charger cords. Lock the Control Box and
USB Charger cords using the locking clips.
Insert the AC cord into the power supply.
IMPORTANT: DO NOT PLUG THE BASE
INTO THE AC OUTLET YET.
4
Insert the legs into the threaded holes
at each corner of the base by inserting
the leg and rotating clockwise until tight.
There must not be any gap or wobble
in the leg in order to avoid risk of injury
or damage to the base which may void
warranty.
Note: If setting two Twin XL's bases to
use with one king size mattress, connect
the Sync cable to the control box (as
pictured) to one base. After bases are
arranged, connect the second Sync Cable
to other base's control box.
6