Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Flush Mount Installation Preparation
PREPARE THE INTERIOR
Cut and install side cleats:
• Cut side wood cleats to height of cabinet
opening and approx. 2-1/2" in depth. Install,
on each side, 1-3/8" from the front face of the
cabinet.
Cut and install bottom cleat:
• Cut bottom wood cleat to a height of 1-1/8", a
depth of the cabinet minus 1-3/8" and a width
of 25-1/4" to fit between side cleats. Install
onto the cabinet floor between the side cleats,
push it all the way back against cabinet wall
and make sure its front face aligns with the front
faces of the side cleats (1-3/8" gap from the
front cabinet face).
A
B
A Side cleats depth
B Bottom cleat height
C Bottom cleat depth
D Bottom cleat width
E All three cleats
C
A
Front Face of Cabinet
E
31-2000355 Rev.1
A
C
D
E
2-1/2" min.
1-1/8"
Cabinet depth minus
1-3/8"
25-1/4"
1 1/4"
D
TOP
VIEW
A
E
PREPARE THE OPENING
The Advantium Built-In Oven can be installed
in combination with other GE Appliances/
Monogram appliances. Always follow each
product's Installation Instructions to complete the
installation.
Single Advantium Built-In Oven
Installation:
Cut the opening in a cabinet to the dimensions
shown.
*See table
below for
desired reveals
on sides.
**20 5/8"
Oven or
warming
drawer
36-3/4"
Min.
• The support must be level and rigidly mounted,
flush with the bottom edge of the cutout.
Approved Flush Installation
Single Advantium
Over Warming Drawer
Over Oven
Over Oven and Warming Drawer
Over Built-in Oven
Double Advantium (side by side)
Under Cooktop or Countertop
** Top and bottom reveals are set to
Construct
.
23-1/2" min
solid bottom
- Min. 3/8"
plywood
supported on
all four sides.
Must be able to
F *
support weight
of oven and
contents.
2" Min.
Per
appliance
specs.
Dimension F
1/8" Reveal 1/4" Reveal
27"
27-
/
"
1
4
27"
27-
/
"
1
4
27"
27-
/
"
1
4
27"
27-
/
"
1
4
27"
27-
/
"
1
4
See page 10
See page 10
/
".
1
8
9
Publicidad
Capítulos
Tabla de contenido
