Led Indicator - AVer AVerVision M70W Manual De Instrucciones

LED Indicator

Name
Power
Battery
WiFi
[Note]
1. The battery will be exhausted for long-term usage. Do not replace the battery yourself. Please
contact your dealer.
2. To complete turn off the camera,
Power Connection and Charging

Please fully charge the camera for the first use.

When the camera is power on, the camera is in "Standby" mode. In standby mode, it can be
charging through the USB connection from other device; but the power supply is required 5V2A and
the charging time will be longer.

The laptop, projector, or monitor cannot provide the power through the USB connection to the
camera while the camera is operating.

When the camera is charging through the wall outlet, the battery indicator is in green flashing.

Press +
Status indicator
Solid green: Power on
No light: Power off
Solid red: Standby mode
Solid green(x3): Battery is full(100% ~ 60%)
Solid green(x2): Battery is 60% ~ 30%
Solid green(x1): Battery is 30% ~ 5%
Solid red (x1): Battery is 5% ~ 0%
Flashing red (x1): Battery is out of power
Solid orange(x3): Battery is abnormal
Solid blue: AP Mode Ready / STA connected
Slow flashing blue: Software connection with camera
Short flashing blue: Create AP mode / STA connecting
Solid green: Miracast mode ready
Slow flashing green: Miracast streaming start
Quick flashing green: Miracast device scan / connecting
press and hold the power button to turn off.
when the camera doesn't work properly. The camera back to standby mode.
English-4