How to Use
Setting Language
Press and hold the button
for 3 seconds to open the language
list, then press the button
to scroll through the language to
select the desired one. Press and hold the button
for 2 seconds
to use the selected language.
Note: The display screen will go off if there is no operation for more
than 10 seconds.
Switching Suction Levels
Press the button
to switch suction levels of eco, standard/
auto, and high power. The corresponding suction level will be
highlighted on the display screen.
Only when using the smart high torque brush bar, the auto mode
will be activated and the notification of "Auto" will appear on the
display screen. The vacuum cleaner will then automatically switch
the suction level between the floor/tile and the carpet.
Note: Stop the vacuum cleaner at any time while cleaning, it will
continue to use the last selected suction level when started
again.
10
Working Modes
The vacuum cleaner has two working modes, you can select the
desired one based on your cleaning needs.
1. Non-continuous Mode
Hold down the power button to start the vacuum cleaner, then
release to stop it.
Non-continuous Mode
2. Continuous Mode
Press the button
to enable Continuous Mode, then press the
power button to turn the vacuum cleaner on. To exit Continuous
Mode, press the button
.
Enabling the Continuous Mode allows the vacuum cleaner to
run continuously without having to hold down the power button,
which can help release your fingers.
Continuous Mode
Notes:
In Continuous Mode, the vacuum cleaner will enter into standby
mode when pressing the power button, and resume running if
pressing the button again.
When the vacuum cleaner keeps in standby mode for more than 10
seconds, its display screen will go off and the vacuum cleaner will
then exit the Continuous Mode.
Using Different Accessories
2-in-1 Brush Nozzle: For vacuuming curtains, sofas, vehicle
interiors, coffee tables, etc.
Mini Electric Brush: For vacuuming dirt, pet hair, and other
stubborn debris from sofas, bedding, and other fabric surfaces.
Notes:
If any rotating part becomes stuck, the vacuum cleaner may
shut off automatically. Remove any trapped foreign objects, then
resume use.
When the motor runs overheated, the vacuum cleaner will
automatically shut off. Wait until the battery temperature returns
to normal, then resume use.
11