Cleaning And Care - Unold 48825 Instrucciones De Uso

Remove ice cream
21. Before removing the ice cream from the appliance, switch off the appliance
with the POWER switch and unplug the power cord from the electrical outlet.
22. Remove the transparent lid.
23. Remove the ice cream bowl from the appliance and carefully pull the mixer
out of the bowl.
24. Transfer the ice cream to a suitable bowl. Do not use sharp or pointed objects
for this; instead, use a plastic or wooden spoon in order not to damage the ice
cream bowl. We recommend using a silicone dough scraper.
25. If desired, you can make more ice cream right away. In this case, start again
with step number 1.
26. Tip: If you make fruit ice cream or sorbet, remove the ice cream bowl as soon
as the program is finished, transfer the ice cream to a bowl suitable for freez-
ing and put this bowl in the freezer so that the ice cream freezes completely.
Otherwise, this ice cream may be slightly soft inside, even if it is firmly fro-
zen on the outside.
27. If you do not wish to make more ice cream, switch the appliance off with the
POWER switch and unplug it from the electrical outlet.

CLEANING AND CARE

Before cleaning, always turn off the appliance, unplug it from the electrical
outlet and allow the appliance to cool.
1. Never clean the appliance with or under water or other liquids. It is espe-
cially important to keep the motor and the compressor from coming into
contact with water.
2. Do not use harsh or abrasive cleaners.
3. The removable parts can be cleaned in warm water with mild dishwashing
detergent. These parts are not dishwasher-safe.
4. Wipe off the compressor housing with a damp cloth.
5. Dry all parts thoroughly with a soft cloth before reassembly.
Copyright UNOLD AG | www.unold.de
31