Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
adjustment of other controls may result in damage and may require service by
a qualified technician to restore the product to normal operation.
e)
If the product has been dropped or the cabinet has been damaged.
f)
If product performance deteriorates.
For the PBX
•
Do not insert foreign objects of any kind into this product, as they may touch
dangerous voltage points or short out parts that could result in a fire or electric
shock.
•
Do not pull, bend, rest objects on, or chafe the power cord and plug. Damage to
the power cord or plug can cause fire or electric shock.
•
Do not attempt to repair the power cord or plug. If the power cord or plug is
damaged or frayed, contact an authorised Panasonic Factory Service Centre for a
replacement.
•
When mounting the PBX on a 19-inch rack, only use the 19-inch rack mounting
equipment (attachment bracket, screws) included with the PBX.
•
If damage to the unit exposes any internal parts, disconnect the power supply cord
immediately and return the unit to your dealer.
•
To prevent fires, electric shock, injury, or damage to the product, be sure to follow
these guidelines when performing any wiring or cabling:
a)
Before performing any wiring or cabling, unplug the product's power cord from
the outlet. After completing all wiring and cabling, plug the power cord back
into the outlet.
b) When laying cables, do not bundle the product's power cord with the power
cords of other devices.
c)
Do not place any objects on top of the cables connected to the PBX.
d) When running cables along the floor, use protectors to prevent the cables from
being stepped on.
e)
Do not run any cables under carpeting.
•
Unplug this unit from the AC outlet if it emits smoke, an abnormal smell or makes
unusual noise. These conditions can cause fire or electric shock. Confirm that
smoke has stopped and contact an authorised Panasonic Factory Service Centre.
•
Make sure that the wall that the unit will be attached to is strong enough to support
the unit (approx. 35 kg). If not, it is necessary for the wall to be reinforced.
•
Only use the wall-mounting equipment (anchor plugs, screws, metal brackets)
included with the PBX and the wall mounting kit. Make sure that the wall is made
of concrete.
3
Publicidad
Tabla de contenido
