EdilKamin LILIA Instalación Uso Y Mantenimiento página 19

INSTRUCTIONS TO APPLY THE GASKET TO
THE CERAMIC TILES
If the side ceramic tiles vibrate during operation,
you can apply the gasket supplied by following
these instructions:
• Remove the cast iron top by loosening the 4
screws (x) beneath the cover of the pellet hopper
(16) and the 2 screws on the back part (y).
• Carefully remove the ceramic lateral sides (11) so
as to prevent damaging them
• Cut 4 pieces of about 3 cm from the 8 x 1 black
adhesive gasket, supplied with the documentation,
and apply them to the back of the ceramic tiles in
the positions shown in the figure, indicated by an .
• Insert the ceramic lateral sides into their housing
• put the top back into place and fasten it
- 19
-