Maintaining your appliance
Removing and replacing the storage drawer
(Model NX58*560***, NX58*751***)
To remove the storage drawer
70 English
1. Pull out the drawer and remove any
stored content.
2. While supporting the drawer, pull it out
until the top of the drawer sides come
out of the two nylon drawer guides.
Then, lift to remove the drawer.
3. Clean the drawer in warm, soapy water.
Rinse and dry thoroughly.
To replace the storage drawer
1. Place the top of both drawer sides in
the openings on the two nylon drawer
guides and push in enough to support
the drawer.
2. Replace any stored content and push
in the drawer while slightly lifting the
front to close it.