PARTS & ASSEMBLY
Your BEVERAGE COOLER requires no assembly. Before using, be sure to remove all packing
materials from the inside of the cooler. Check the unit for any damage, such as misaligned or
bent door, damaged door seals or sealing surfaces, broken or loose door hinges or latches,
or dents inside the refrigerator or on the door. If there is any damage, DO NOT use the
cooler. Return damaged item to the store where it was purchased.
LED Light
Wire
Shelves
Thermostat Dial & Light Switch (located in back of unit)
0 = OFF
2-4 = Normal Use
7
1 = Higher (warmer) Temperature
5 = Lower (colder) Temperature
Thermostat Dial
Light Switch
Double-Pane
Glass Door