aqua technix Majestic Timer Traducción De Las Manual Original página 23

Caution
When the pump is installed outside, we recommend providing
simple protection against the weather (rain, sun etc.).
Caution
Implement appropriate measures to attenuate the noise generated
by the pump to avoid damage to the environment. Fastening the
pump to the foundation should be effected exclusively by means of
bolts, threads or dowels, in order to avoid blocking the removal of
the motor unit! Make sure that there is enough space between the
fan cover and the wall, minimum 50 mm. You also need enough
space to permit disassembly of the strainer basket, minimum
210 mm above.
The pump should be installed at water
level or below water level and in a horizontal
position, in order to keep the suction path
as short as possible and to reduce head
loss. The Majestic Timer is self-priming
and should never be installed more than
2 m above water level. Make sure that
the suction line is not leaky, otherwise the
pump will prime insufficiently or not at all.
We recommend the installation of check
valves and shut-off valves, depending on
the type of pump or plant. The adhesive
bonds at the suction and pressure lines
require more time to cure, allow at least 12
hours before starting the pump.
W91.40.616-P
W91.40.617-P
W91.40.018-P
23 |