Tecnoinox FTL4G9 Manual De Instrucciones página 15

Part 4
CLEANING:
The unit must be cold to clean it.
Keeping the appliance clean is very important for a long and trouble-
free working life.
The removable parts should be washed separately with warm water
and detergent, then rinsed in running water. Do not use harsh or
abrasive detergents to clean the stainless steel parts. Iron cleaning
The appliance needs no specific maintenance besides ordinary cleaning; we do however suggest having it checked once a year by the
assistance centre: for this purpose, we recommend drawing up a maintenance contract.
REMEMBER THAT THE APPLIANCE:
■
Must never be left unattended when it is being used!
■
When switched on, its surfaces get very hot so please take great care!
■
Is intended for professional use and therefore only qualified personnel should use it!
■
Installation, as well as any conversion or adaptation to a different type of gas, must be carried out in accordance with laws in force and
only by qualified and authorized personnel.
■
At least once a year have the appliance checked by qualified personnel.
■
All the parts of the appliance that come into contact with food during use should be cleaned regularly as indicated in the chapter
"Cleaning and Care of the appliance".
In case of fire, close the shut-off cock immediately, and use a suitable fire extinguisher.
The Manufacturer declines any responsibility for damage caused by improper or incorrect installation or maintenance of the
appliance, or failure to observe safety regulations!
Our appliances are studied and optimised, with lab tests, to provide
high performance and yields. However, to keep energy consumption
low (electricity, gas and water), we suggest not using the appliance
for any length of time if it is empty or in conditions that compromise
optimum yield.
All packaging materials are environment-friendly. They can be kept
without risk or burnt in a proper waste incinerator plant. The plastic
components that can be recycled are:
■ Polyethylene: external packaging material and/or pluribol film.
■ Polypropylene: straps.
Cleaning and care of the appliance
pads should not be used as they cause the formation of rust. For the
same reason, avoid contact with ferrous materials.
While cleaning, avoid using abrasive paper or cloth; alternatively and
only in special cases you can use pumice stone powder; we
recommend using sponges (e.g. Scotch Brite) to remove stubborn
deposits.
To minimise the emission of polluting substances in the environment,
we suggest cleaning the appliance with products that are at least
90% biodegradable.
Maintenance
Safety precautions
Ecology and environment
■ Polystyrene foam: corner pieces, plates and protection blocks.
At the end of the appliance's useful life, dispose of it properly.
More than 90% of each appliance is made of metal (stainless steel,
iron, aluminated sheet, etc.), hence it can be recycled by the relative
recycling organisations in compliance with the standards in force in
your country.
GB / IE - 6
Maintenance and cleaning
Prepare the appliance for disposal, so it cannot be used
any more, by removing the power cable and any locks so
that no one can get locked inside accidentally.
5410.289.00