Appliance Description; Set-Up/Wall Holder - Dentalux KH123 Instrucciones De Uso

Appliance description

1 Brush head
2 Brush holder
3 Charging station
4 Wall holder
5 Charge indicator
6 Pulse LED (yellow)
7 Soft LED (green)
8 "Clean" LED (orange)
9 On/Off switch
0 Travelling case

Set-up/Wall holder

The charging station 3 may only be operated free-standing
in dry rooms.
In moist rooms, especially in the vicinity of water (bath), the
charging station 3 must be fi rmly fi xed to the wall, to protect
it from falling into water.
• Pull the wall holder 4 downwards from underneath the
charging station 3.
• Using the screw openings of the wall holder 4, mark the
spacing for the boreholes on the wall. Check to ensure that
there is a mains power socket in close vicinity.
• Before boring the holes, check to ensure that there are no
electrical or water conduits behind the markings.
• Affi x the wall holder 4 using the plugs and screws.
• When you have attached the wall holder 4, guide the
power cable through the right or left recess in the wall
holder 4 (see magnifi cation on the fold-out side).
Using the guide rails, slide the charging station 3 onto the
wall holder 4.
• Ensure that the power cable is not trapped and that it lies
properly in the recesses.
- 40 -