Publicidad
Idiomas disponibles
Idiomas disponibles
16. Attaching the cot bumper
Lay the bumper in the cot, folding the top part over the edge of the
carrycot.
17. Inserting the mattress
Insert the mattress in the cover.
Lay the mattress on the base.
NB: The mattress is wedge-shaped. Make sure that the raised part
is at the head end.
18. Fitting the cot on the pram
Recline the back of the seat. Position the carrycot on the pram.
Take hold of the strap which is fitted to the rear of the cot and pull it
through the opening provided in the seat cover.
Fasten and tighten the belt on the rear of the backrest.
Flip up the footrest at the lower end of the cot and secure the strap
around the footrest. Fasten and tighten the strap.
19. Fitting the apron
Fit the closed end of the apron over the lower end of the carrycot.
Extend the apron over the cot.
Secure the ends of the apron with the snap fasteners provided on
the cot and cover
20. Attaching the mosquito net
Unzip the top end of the apron and pull out the mosquito net.
Pull the mosquito net over the cover and fasten it to the cover. Then
fasten the apron to the mosquito net.
EN - 12
16
17
18
18
18
19
20
20
21. Fitting the foot muff
Undo the strap and position the liner on the seat.
Pull the five straps through the openings provided in the cover.
Now you can fasten the apron with the zip fastener on the liner.
22. Fitting the apron
Take the lower part of the foot muff out of the bag.
Zip the top and bottom parts of the foot muff together.
Secure the foot muff to the pushchair by attaching the apron to the cover
using the snap fasteners provided.
21
21
21
22
22
22
EN - 13
Publicidad
