Care And Cleaning; Maintenance - Toto GR TLG02311U Manual De Instalación Y Del Propietario

Ocultar thumbs Ver también para GR TLG02311U:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Clean the parts regularly to prevent the accumulation of dirt and lime-scale.
For daily cleaning, use a neutral cleaner.
Acids are necessary ingredients of cleaning materials for removing lime.
However, please pay attention to the following points when cleaning fittings:
Only use cleaning materials which are explicitly recommended for this
type of application.
Never use cleaning materials which contain hydrochloric, formic or
acetic acid, as they may cause considerable damage.
Do not use phosphoric acid as it can also cause damage.
Never use cleaning materials or appliances with an abrasive effect,
such as cleaning powders, sponges or microfiber cloths.
Please follow the cleaning material manufacturer's instructions.
When using spray cleaners, spray first onto a soft cloth or sponge.
Never spray directly onto the fittings, as drops could enter openings
and gaps, which can then cause damage.
After cleaning, rinse thoroughly with clean water to remove any cleaner
residue.
Components with damaged surfaces must be exchanged, otherwise
this can cause an injury. Damage caused by improper treatment will
not be covered by our warranty.
Check your faucet at least once a month for the following potential problems
and to do the following maintenance procedures:
Inspect for Leakage
Check all water connections for signs of leakage.
Looseness of the product
Check for any parts that seem abnormal such as being loose as compared
when you first began using the product.
Tighten the Spout and Handle Assembly
If the spout is loose, tighten the hexagonal nut underneath the spout.
If you continue to use the product with loose piping, load is applied to the pipe(s)
and may result in water leakage.
If you leave any abnormality like looseness unfixed, part(s) may break or plated
surfaces may crack whereby injuring you.
If you find a loose part, remove the cap and retighten the screw that anchors the
main body. In case the looseness cannot be repaired, ask your dealer or seller for
repairs (subject to billing).

CARE AND CLEANING

MAINTENANCE

8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Go tlg01310uGs tlg03308uGo tlg01311u

Tabla de contenido