LG DLEX3570 Serie Manual Del Propietário página 49

Before Calling For Service (cont.)
Steam does not
generate but
no error code is
shown
Garments still
wrinkled after of garments in dryer.
STEAM FRESH™
There are no
creases left on remove wrinkles from fabric.
garment after
STEAM FRESH™
Garments have
static after
REDUCE STATIC
Garments are
too damp or
selected.
too dry after
REDUCE STATIC
Garments are Number of garments or load
not uniformly size not properly selected at the
damp after beginning of the cycle.
EASY IRON
Water drips
from door
during Steam
Cycle
Steam is not
visible during
Steam Cycle
Drum does not
turn during
Steam Cycle
Cannot see
steam vapor at
the beginning
of cycle
STATIC option.
starting the cycle.
dryer door during steam operation. Some condensation
may drip out the bottom of the door.
However, condensation will normally form on the inside of
the dryer door if the steam system is operating normally.
the drum. The drum will normally turn for about 2 seconds
once a minute.
option.
TROUBLESHOOTING
49