Operation - Husqvarna 122HD45 Manual Del Usuario

Ocultar thumbs Ver también para 122HD45:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you use the product.
Stop the engine and make sure that the cutting
equipment stops. Let the product become cool
before you do the maintenance.
Disconnect the spark plug cap before you do the
maintenance.
The exhaust fumes from the engine contain carbon
monoxide, an odourless, poisonous and very
dangerous gas that can cause death. Do not run the
product indoors or in closed spaces.
The exhaust fumes from the engine are hot and can
contain sparks. Do not run the product indoors or
near flammable material.
Introduction
WARNING: Read and understand the safety
chapter before you use the product.
Fuel
This product has a two-stroke engine.
CAUTION: Incorrect type of fuel can result in
engine damage. Use a mixture of gasoline
and two-stroke oil.
Premixed fuel
Use Husqvarna premixed alkylate fuel of a good
quality, for best performance and extension of the
engine life. This fuel contains less harmful chemicals
compared to regular fuel, which decreases harmful
exhaust fumes. The quantity of remains after
combustion is lower with this fuel, which keeps the
components of the engine more clean.
To mix fuel
Gasoline
Use good quality unleaded gasoline with a maximum
of 10% ethanol contents.
CAUTION: Do not use gasoline with an
octane grade less than 90 RON/87 AKI.
Use of a lower octane grade can cause
engine knocking, which causes engine
damages.
We recommend that you use gasoline of a higher
octane grade for work with continuously high rpm.
8
Accessories and changes to the product that are not
approved by the manufacturer, can cause serious
injury or death. Do not change the product. Always
use original accessories.
If the maintenance is not done correctly and
regularly, there is an increased risk of injury and
damage to the product.
Only do the maintenance as this operator's manual
recommends. Let an approved Husqvarna service
agent do all other servicing.
Let an approved Husqvarna service agent do
servicing on the product regularly.
Replace damaged, worn or broken parts.

Operation

Two-stroke oil
For best results and performance use Husqvarna
two-stroke oil.
If Husqvarna two-stroke oil is not available, use a
two-stroke oil of good quality for air-cooled engines.
Speak to your servicing dealer to select the correct
oil.
CAUTION: Do not use two-stroke oil for
water-cooled outboard engines, also
referred to as outboard oil. Do not use oil
for four-stroke engines.
To mix gasoline and two-stroke oil
Gasoline, liter
5
10
15
20
US gallon
1
2 1/2
5
CAUTION: Small errors can influence the
ratio of the mixture drastically when you mix
small quantities of fuel. Measure the quantity
Two-stroke oil,
liter
2% (50:1)
0.10
0.20
0.30
0.40
US fl. oz.
2 ½
6 ½
12 ⅞
994 - 001 - 25.02.2019

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

122hd60700 hd60 el

Tabla de contenido