Página 1
INSTRUCTIONS MANUAL FOUR LIGHT LED FIXED TRACK MODEL EVT101727 MODEL EVT101727 Page 1...
Página 2
Thank you for purchasing this EnviroLite Four Light LED Fixed Track. This product has been manufactured with the highest standards of safety and quality. FEATURES: 1. Easy to install. 2. Energy Efficient LED Lighting QUESTIONS PROBLEMS MISSING PARTS QUESTIONS, PROBLEMS, MISSING PARTS: Please call our Customer Service Team at 1‐855‐573‐6156.
Página 3
CAUTION: 1. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box fuse at the fuse box. 2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
PARTS INCLUDED FOR INSTALLATION (parts are not to scale): 1 ea Mounting 2 ea Bracket Mounting Bracket (#4) Screws (#5) 3 ea Wire Nuts (#14) 1 ea Fixture (#1) 1 ea Fixture (#1) INSTALLATION INSTRUCTIONS: 1. Remove the Canopy Mounting Screws (#6) from the Mounting Bracket (#4). Keep the Canopy Mounting Screws (#6). (Fig. 2) 2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the Straight Bar (#7). (Fig. 3) 3.
FIVE‐YEAR LIMITED WARRANTY EnviroLite EnviroLite warrants this product to be free from defects in material and workmanship for warrants this product to be free from defects in material and workmanship for five years from the original date of purchase by the consumer. This warranty is limited to the counter replacement at the time of purchase, with the original purchase receipt.
Gracias por comprar este riel fijo con cuatro luces LED de EnviroLite Este producto ha sido fabricado con los estándares más altos de seguridad y calidad. CARACTERÍSTICAS: 1. Fácil de instalar. 2. Iluminación de bajo consumo LED PREGUNTAS PROBLEMAS PARTES FALTANTES PREGUNTAS, PROBLEMAS, PARTES FALTANTES:...
PRECAUCIÓN: 1. Antes de iniciar la instalación de este luminario o la remoción de un luminario anterior, desconecte la energía eléctrica al apagar el disyuntor de circuitos o al quitar el fusible en la caja de fusibles. l f ibl j d f ibl 2.
Página 10
PARTES INCLUIDAS PARA LA INSTALACIÓN (las partes no se muestran a escala): 1 Ménsula de 2 Tornillos para montaje (#4) montar la ménsula (#5) 3 Tuercas para cables (#14) 1 Luminario (#1) INSTRUCCIONES DE INSTALACIÓN: 1. Quitar los tornillos de montaje de cubierta (#6) del ménsula de montaje (# 4). Mantenga los tornillos de montaje de cubierta (#6).(Fig. 2) 2. Girar la barra giratoria (# 9) del ménsula de montaje (# 4) de modo que sea perpendicular a la barra recta (# 7). (Fig.
INSTALACIÓN: 3. Caja de distribución Fig. 3 6. Tornillo de 4. Ménsula de montaje de montaje cubierta Fig. 2 5. Tornillos para 7. Barra montar la recta recta ménsula 9. Barra giratoria 3. Caja de distribución 16. Cable a tierra de alim. Fig. 4 15. Cable blanco 17. Tornillos de 9. Barra 13. Tuerca para de alimentación Centro giratoria cables 14. Cable negro de alimentación ió 11. Cable blanco del luminario 12. Cable a 10. Cable negro del tierra del lum. luminario 3. Caja de ...
compra original. EnviroLite no se responsabiliza por ningún tipo de pérdida o daño así como tampoco por daños incidentales o indirectos, ya sea que se basen en el contrato de garantía o en negligencia y que resulten de la venta, uso o reparación del producto que se...
Página 13
MODE D’INSTALLATION RAIL D’ÉCLAIRAGE À 4 LUMIÈRES DEL MODÈLE EVT101727 MODÈLE EVT101727 Page 13...
Página 14
Merci d'avoir acheté cet rail d’éclairage à 4 lumières DEL de EnviroLite . Cet article a été fabriqué selon les normes de sécurité et de qualité les plus rigoureuses. CARACTÉRISTIQUES : 1. Facile à installer. 2. Éconergétique Éclairage DEL QUESTIONS PROBLÈMES PIÈCES MANQUANTES QUESTIONS, PROBLÈMES, PIÈCES MANQUANTES :...
Página 15
MISE EN GARDE : 1. Avant de commencer à installer ce luminaire ou à enlever l’ancien luminaire, coupez le courant au niveau du disjoncteur ou retirez le f ibl d l b ît d f ibl fusible de la boîte de fusible. 2. CONSULTEZ UN ÉLECTRICIEN CERTIFIÉ SI VOUS AVEZ DES QUESTIONS CONCERNANT L’INSTALLATION ÉLECTRIQUE.
Página 16
PIÈCES NÉCESSAIRES À L’INSTALLATION (les illustrations ne sont pas à l’échelle) : 1 plaque de fixation 2 vis de montage (nº 5) (nº 4) 3 capuchons de connexion 1 luminaire (nº 1) (nº 14) MODE D’INSTALLATION : 1. Devissez les vis de montage du pavillon (nº 6) de la plaque de fixation (nº 4). Conservez les vis de montage du pavillon (nº 6). (Fig. 2) 2. Faites tourner la barre pivotante (nº 9) de la plaque de fixation (nº 4) jusqu’à ce qu’elle soit perpendiculaire à la ) j q barre fixe (nº...
Página 17
INSTALLATION : 3. Boîte de sortie 7. Barre 6. Vis de 4. Plaque de fixe montage du fixation pavillon Fig. 2 5. Vis de Fig. 3 montage de la plaque de fixation 9. Barre pivotante 3. Boîte de sortie 16. Fil de terre de la boîte de sortie 17. Vis du center Fig. 4 9. Barre 13. Capuchon de pivotante 15. Fil d’alimentation blanc connexion 14. Fil d’alimentation noir 11. Fil blanc du luminaire 12. Fil de terre du luminaire 10. Fil noir du luminaire 3. Boîte de sortie Fig. 5 8. Pavillon 6. Vis de montage du pavillon Fig. 6 8. Pavillon...
d’achat initial. EnviroLite ne pourra être tenue responsable d’aucune perte ou dommage de quelque sorte que ce soit, d’aucun dommage accessoire ou indirect, fondé sur la garantie ou la négligence, découlant de la vente, de l’utilisation ou de la réparation du produit réputé...