Warning Messages; Caution Messages - Sony VPL-HS10 Manual De Instrucciones

A still picture in the
"Memory Stick"
cannot be rotated or
deleted.
The "Memory Stick"
cannot be formatted.
The thumbnails are not
displayed.
The still pictures files
in the JPEG format
stored in a "Memory
Stick" cannot be
displayed.
The movie picture files
in the MPEG1 format
stored in a "Memory
Stick" cannot be
displayed.
Indicators
The LAMP/COVER or TEMP/FAN indicator on the
control panel lights up or flashes if there is any trouble
with your projector.
LAMP/COVER Indicator
LAMP/
COVER
LAMP/COVER
flashes.
LAMP/COVER
lights up.
TEMP/FAN
flashes.
TEMP/FAN
lights up.
LAMP/COVER
and TEMP/FAN
light up.
52
Troubleshooting
GB
c Release the lock for the write-
protect tab on the "Memory
Stick". (1 page 32)
c Release the protect in the index
screen. (1 page 42)
c Release the lock for the write-
protect tab on the "Memory
Stick". (1 page 32)
c The "Memory stick" is broken.
Use another "Memory Stick".
c The pictures are the JPEG
format but not DCF-compatible.
Use the DCF-compatible
pictures.
c Set "Filter" in the "Option"
menu to "Still" or "Off."
c Set "Filter" in the "Option"
menu to "Movie" or "Off."
TEMP/FAN Indicator
TEMP/ POWER ON/
FAN SAVING STANDBY
c Attach the lamp cover or the air filter
cover securely. (1 pages 53 and 54)
c The lamp has reached the end of its
life. Replace the lamp. (1 pages 53)
c The lamp becomes a high temperature.
Wait for one minute to cool down the
lamp and turn on the power again. (1
page 22)
c The fan is broken. Consult with
qualified Sony personnel.
c The internal temperature is unusually
high. Check to see if nothing is
blocking the ventilation holes.
c The electrical system breaks down.
Consult with qualified Sony
personnel.

Warning messages

Use the list below to check the meaning of the
messages displayed on the screen.
High temp.! c Turn off the power.
c Check to see if nothing is blocking the
Lamp off in 1
min. ventilation holes.
c Input a signal that is within the
Frequency is
out of range! acceptable range of the frequency.
c Set the output signal on an external
monitor of the connected computer to
SVGA.
c Set "Input-A Signal Sel." in the SET
Please check
Input-A Signal SETTING
Sel. when RGB signal is input from the
computer. (1 page 29)
c Set "Digital Signal Sel." in the SET
Please check
Digital Signal SETTING
Sel. when RGB signal is input from the
computer.(1 page 29)
Note
Before you change the "Digital Signal Sel."
setting, disconnect the DVI cable and turn off the
digital tuner, etc.
Please replace c It is time to replace the lamp. Replace
the LAMP. the lamp. (1 page 53)
Please replace c It is time to replace the air filter. Replace
the filter. the air filter. (1 page 54)

Caution messages

Use the list below to check the meaning of the
messages displayed on the screen.
c No signal is input. Check connections.
NO INPUT
(1 page 13)
Not applicable! c Press the appropriate button.
Caution regarding messages while
using the "Memory Stick"
Use the list below to check the meaning of the
messages.
No Memory c Insert the "Memory Stick" into the
Stick "Memory Stick" slot correctly.
c No picture files are contained in the
No file
currently selected folder.
c No movie picture files are contained in
No movie file
the currently selected folder although
"Filter" is set to "Movie" in the
"Option" menu.
No still file c No still picture files are contained in the
currently selected folder although
"Filter" is set to "Still" in the "Option"
menu.
menu to "Computer"
menu to "Computer"