Husqvarna AUTOMOWER 310 Guía Rápida página 6

Formoreinformationandinstructions,readthecompleteOperator'smanualontheHusqvarnawebsite
(www.husqvarna.com)
1. PL ACEMENT OF AND CONNECTING THE CHARGING STATION
1. Place the charging station at a central position in the working area, with a lot of open space in front of the charging station
andonarelativelyhorizontalsurface.
2. Connectthepowersupply'slowvoltagecabletothechargingstationandthepowersupply.
3. Connectthepowersupplytoa100-240Vwallsocket.
4.  P lacetheroboticlawnmowerinthechargingstationtochargethebatterywhiletheboundarywireislaid.Setthemain
switch to position 1.
2. PL ACEMENT OF THE BOUNDARY WIRE AND THE GUIDE WIRE
1.  L aytheboundarywiresothatitformsalooparoundtheworkingarea.
2. Makeaneyeletatthepointwheretheguidewirewilllaterbeconnected.
3.  R untheguidewiretothepointontheboundaryloopwheretheconnectionwillbemade.Avoidlayingthewireattight
angles.
3. CONNECTING THE BOUNDARY WIRE AND THE GUIDE WIRE
1.   N arrowpassagesintheyardmakeitdifficultfortheroboticlawnmowertofindthechargingstation.Theroboticlawnmower
canbeleadtoremoteareasusingtheguidewire.Theguidewirealsohelpstheroboticlawnmowertoquicklyfindthe
charging station.
2.  L aytheguidewireunderthechargingstationandatleast2m/7ftstraightoutfromthefrontedgeofthechargingstation.
3. Opentheconnectorsandlaythewireendsintherecessesoneachconnector.
4. Press the connectors together using a pair of pliers.
5. Cutoffanysurplusboundarywire.Cut1-2cm/0.4-0.8"abovetheconnectors.
6.   P resstheconnectorsontothecontactpins,markedAL(left)andAR(right),onthechargingstation.Itisimportantthatthe
right-hand wire is connected to the right-hand contact pin, and the left-hand wire to the left-hand pin.
7. Fasten the connector to the contact pin marked G1 on the charging station.
4. CONNECTING THE GUIDE WIRE TO THE BOUNDARY WIRE
1. Cuttheboundarywirewithawirecuttersatthecentreoftheeyeletthatwasmadeinstep2.2.
2.  C onnecttheguidewiretotheboundarywireusingtheaccompanyingcouplers.Pressthecouplerscompletelytogetherwith
apolygrip.
STARTING AND STOPPING
STARTING
1. OpenthecoverbypressingtheSTOP button.
2. Set the main switch to position 1.Whenyoudothisforthefirsttime,astartupsequencestartswhereyouselectafourdigit
PIN code among other things.
3. Press the START button and close the cover.
STOPPING
Press the STOP button.
ADJUSTING THE ROBOTIC L AWN MOWER TO SUIT THE SIZE OF YOUR L AWN
Themowingresultsdependonmowingtime.AdjustthemowingtimetosuityouryardusingtheSchedule function. You decide
whattimesduringthedaytheroboticlawnmoweristowork.Theroboticlawnmowercutapproximately56m²/603ft²perhour
anddayforAutomower®310,68m²/732ft²forAutomower®315and73m²/786ft²forAutomower®315X.Forexample;if
youryardconsistsof800m²/8600ft² oflawn,theroboticlawnmowershouldwork15hoursadayforAutomower®310,12
hoursforAutomower®315and11hoursforaAutomower®315X.
MAINTENANCE
1. The main switch should be in the 0 position during all work on the robotic lawn mower's chassis, such as cleaning or
replacingtheblades.Replacethebladesregularlyforthebestmowingresult.
2. Never use a high-pressure washer or even running water to clean the robotic lawn mower. Never use solvents for cleaning.
3.  A llconnectionstothechargingstation(powersupply,boundaryandguidewire)mustbedisconnectedifthereisariskofa
thunderstorm.
4. Fullychargethebatteryattheendoftheseasonbeforewinterstorage.
QG_P15_1142654.indd 6 QG_P15_1142654.indd 6
en
2020-12-30 11:17:47 2020-12-30 11:17:47