Troubleshooting Schedule - Husqvarna 136LiL Manual De Instrucciones

Troubleshooting schedule

Troubleshooting takes place from the keypad.
Keypad
Keypad
Warning indicator flashing.
No. 3 in figure (5).
The machine does not start
Warning indicator lit.
No. 3 in figure (5).
Troubleshooting the battery and/or the battery charger during charging.
Battery
LED display
Warning indicator flashing.
No. 3 in figure (27).
Warning indicator lit.
No. 3 in figure (27).
Battery charger
LED display
Red LED blinking
Red LED on
20 – English
MAINTENANCE
Possible faults
Overload.
Temperature deviation.
Dirt in battery connectors.
The power trigger and the activate
button are pressed at the same time.
Service
Possible faults
The battery is discharged.
Temperature deviation.
Over voltage.
Cell difference too much (1V).
Possible faults
Temperature deviation.
Permanent damage.
Possible action
The trimmerhead is jammed.
Remove the battery from the
machine. Release the trimmer head
from grass.
Allow the machine to cool down.
Clean with compressed air or a soft
brush.
Release the power trigger and the
machine is active.
Contact your service agent.
Possible action
Charge the battery.
Use the battery in surroundings
where temperatures are between -10
°C (14 °F) and 40 °C (104 °F).
Check that the mains voltage
corresponds with that stated on the
rating plate on the machine.
Remove the battery from the battery
charger.
Contact your service agent.
Possible action
Use the battery charger only when the
surrounding temperature is between 5
°C (41 °F) and 40 °C (104 °F).
Contact your service agent.