Tabla De Contenido; Alert Symbols; Declaration Of Conformity - Argo AWIAS7DC Instrucciones De Uso

3742540532-U-AWIAS7-BS9DC
CONTENTS
NAME OF PARTS AND OPERATION SELECTOR SWITCH
INSTALLATION LOCATION
ELECTRICAL REQUIREMENTS
SAFETY INSTRUCTIONS
USING THE REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
HOW TO SET THE PRESENT TIME
EG
COOLING
HEATING
AUTOMATIC OPERATION
DEHUMIDIFYING (DRY)
FAN ONLY
ADJUSTING THE FAN SPEED
FILTER Ti0
NIGHT MODE/ENERGY SAVING
HIGH POWER MODE
SETTING THE TIMER
SETTING THE 1 HOUR TIMER
SETTING THE HOLIDAY TIMER
ADJUSTING THE AIR FLOW DIRECTION
OPERATION WITHOUT THE REMOTE CONTROL UNIT
CARE AND CLEANING
TIPS FOR ENERGY SAVING
TROUBLESHOOTING
PRODUCT INFORMATION
If you have problems or questions concerning your Air
Conditioner, you will need the following information. Model
and serial numbers are on the nameplate on the bottom of
the cabinet.
Model No.
Serial No.
Date of purchase
Dealer's address
Phone number
NOTE
This air conditioner is equipped with cooling, drying, heating and fan only functions.
Details on these functions are provided below; refer on these descriptions when using the air conditioner.

DECLARATION OF CONFORMITY

This product is marked
- Low voltage no. 2006/95/EC (Standard: EN60335-2-40:2003 (incl. Corr.:2006) + A11:2004 + A12:2005 + A13:2012
+ A1:2006 + A2:2009 con EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010
+ A15:2011).
- Electromagnetic compatibility no. 2004/108/EC, 92/31 EEC and 93/68 EEC. (Standard: EN55014-1 (2006) +
A1(2009) + A2(2011), EN 55014-2 (1997) + A1(2001) + A2 (2008), EN 61000-3-2 (2006) + A1(2009) + A2(2009),
EN 61000-3-3 (2008)
- RoHS2 no.2011/65/EU.
- Regulation (EU) no. 206/2012, of 6 march 2012, concerning the specifications for ecodesign requirements of air
conditioners and fans.
- Regulation (EU) no. 626/2011, of 4 may 2011, concerning the labeling indicating the energy consumption of air
conditioners.
This declaration will become void in case of misuse and/or non observance though partial of manufacturer's installation
and/or operating instructions.
20-07-2015 8:49
2
as it satisfies Directives:
2
Pagina 2

ALERT SYMBOLS

The following symbols used in this manual, alert you to
potentially dangerous conditions to users, service personnel
or the appliance:
WARNING
This symbol refers to a hazard or unsafe practice which
can result in severe personal injury or death.
CAUTION
This symbol refers to a hazard or unsafe practice which
can result in personal injury or product or property damage.
3
4
4
4
4
5
6
6
6
6
7
7
7
7
7
8
8
8
8
9
10
10
11
11