2
Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by
referring to "1" of the Wall-Mount Bracket Installation Guide.
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
Standard mounting
Slim mounting
For instructions on Wall-Mount Bracket installation of your TV model, refer to the following website:
www.sony.eu/tv/wall-mount-bracket-manual
12
GB
Belt
Belt
Pulley
Screw (+PSW 6 x 20)
Spacer (60 mm)
Screw (+PSW 6 x 50)
Pulley
Screw (+PSW 6 x 20)
Spacer (20 mm)
Screw (+PSW 6 x 20)