Overview Of Remote Control Buttons - Sony Wega KE-P37XS1 Manual De Instrucciones

Overview of Remote Control Buttons

2
1
3
4
5
6
7
8
9
q;
10
Overview & Installation
1 TV I/ : To Temporarily Switch Off TV (standby mode):
Press this button to temporarily switch off TV (the standby indicator
lights up). Press again to switch on TV from standby mode.
• To save energy we recommend switching off completely when TV is
not in use.
• If the "Auto Shutoff" option is set to "On" (see page 25) the TV
switches automatically into standby mode after 15 minutes without a
TV signal and without any button being pressed.
2 VIDEO I/ : press this button to switch your VCR or DVD on or off.
3 Media Selector: press these buttons to select which device you want to operate,
TV, VCR, DVD or AUX. A green light will be momentarily lit to show which one
you have selected. For details refer to pages 41-43.
4 Selecting TV mode: press this button to switch off Teletext or Video input
mode.
5 Selecting input source: press this button repeatedly until the desired input
symbol of the source appears on the TV screen. Refer to page 40.
6 Switching off the picture: press this button to switch off the picture. Only the
picture is switched off; the sound remains on. Press again to cancel.
7 Selecting broadcast channels: if Media Selector (3) is switched to TV,
press these buttons to select channels. For double-digit programme numbers, enter
the second digit within 2.5 seconds.
8 a) Watching last channel selected: if Media Selector (3) is switched to
TV, press this button to return to the previous channel you were watching
(provided you watched it for at least 5 seconds).
b) Selecting VCR double-digit: if Media Selector (3) is switched to VCR,
press this button to select double-digit channels for Sony's VCR e.g. 23, press
-/-- first and next the buttons 2 and 3.
9 a) Fastext: if Media Selector (3) is switched to TV and whilst you are in
Teletext mode, these buttons can be used as Fastext buttons. For details see
page 36.
b) Operating VCR or DVD: if Media Selector (3) is switched to VCR or
DVD, these buttons will operate the main functions of your VCR or DVD,
once the remote control has been programmed. Refer to page 41.
q; Teletext: press this button to switch on Teletext. For details see page 36.
on the TV
continued...