Av2 Output; Picture Off; Logo Illumination - Sony Wega KDE-W50A11E Manual De Instrucciones

AV2 Output

Sets a signal to be output through the socket labelled
you connect a VCR or other recording equipment to the
record from the equipment connected to other sockets of the TV.
1
Press OK to select "AV2 Output".
2
Press M/m to select one of the following, then press OK.
Auto: Outputs whatever is being viewed on the screen.
TV Analog: Outputs an analogue broadcast.
TV Digital: Outputs a digital broadcast.
AV1: Outputs signals from equipment connected to the
AV3: Outputs signals from equipment connected to the
AV6: Outputs signals from equipment connected to the

Picture Off

Switches off the picture. You can still listen to the sound with the picture off.
1
Press OK to select "Picture Off".
2
Press M/m to select "On", then press OK.
The
picture, press any buttons (except 2 +/- and 9).

Logo Illumination

Illuminates the SONY logo on the TV (front).
1
Press OK to select "Logo Illumination".
2
Press M/m to select "Yes", then press OK.
(Picture Off) indicator on the TV (front) lights up in green. To restore the
/ 2 on the rear of the TV. If
/ 2 socket, you can then
/ 1 socket.
/ 3 socket.
6/ 6 socket.
29
GB