Teac A-R630 Manual Del Usuario página 9

4
Select a source by turning the INPUT SELECTOR (or
pressing one of the input buttons of the remote control
unit).
Tape Monitor Function
If you want to select the source connected to TAPE 2 jacks, press
the TAPE 2 MONITOR button to turn the tape monitor function
on. The TAPE 2 MONITOR indicator lights.
Press the TAPE MONITOR button again to cancel the tape monitor
function.
< When the tape monitor function is on, sources other than TAPE 2
cannot be heard. Be sure to turn the function off while listening
to other sources.
5
Play the source, and gradually turn up the volume to the
required level by turning the VOLUME knob.
Recording
1. Select a source to be recorded by turning the INPUT
SELECTOR.
2. Start recording.
< The volume and tone control have no effect on the recording
signals.
< If a 3-head cassette tape deck is connected to TAPE 2 (PLAY and
REC) jacks, and if the tape monitor function is set to on during
recording, you can listen to not the source sound but the sound
being recorded. Press the TAPE MONITOR button to turn on or off
the tape monitor function.
Selecting the speakers
Press the SPEAKERS button (A or B) to turn the speakers on or off.
9