Data Plate - Bosch 300 Serie Manual De Uso

Oven Problem
Control does not react when a key is
touched.
Fan is running during modes that do not
use convection
Warm air or steam escapes from oven
vent.
Cooling fan runs even when the oven is
turned off.

Data Plate

How to Obtain Service or Parts
Possible Causes and Suggested Solutions
Be sure that surface is clean and dry. Touch the center of the touch key.
Use the flat part of your finger.
On some models, the convection fan runs while the oven is preheating.
This is normal.
It is normal to see or feel steam or warm air escaping from the oven vent.
Do not block the vent.
This is normal. The cooling fan will continue to run, even after the oven has
been turned off, until the oven has cooled sufficiently.
The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service. The data plate is located on the underside of
the control panel:
Data Plate
To reach a service representative, see the contact information at the front of the
manual. Please be prepared with the information printed on your product data plate
when calling.
English 31