Output Setup Menu - Tripp-Lite SU40K El Manual Del Propietario

10 – Display and Confi guration
10-8 Bypass Setup Menu
• From the "VOLTAGE RANGE" screen, use the scroll buttons
3
( , ) to select a bypass voltage range and press the enter button
( ) to confirm the setting.
• From the "FREQUENCY RANGE" screen, use the scroll buttons
4
( , ) to select a bypass frequency range and press the enter
button ( ) to confirm the setting.
Note: Press the "ESC" button to return to the previous menu.

10-9 Output Setup Menu

Note: The UPS system must be in bypass mode to change the output
parameters.
• Enter the UPS system setup menu as described in Section 10-7.
1
Use the scroll buttons ( , ) to move the cursor to "OUTPUT
SETUP", then press the enter button (
2
• Use the scroll buttons ( , ) and the enter button (
one of the menu choices.
• 3 From the "VOLTAGE" screen, use the scroll buttons
( , ) to select the desired setting and press the enter button (
to confirm the setting.
(continued)
(continued)
).
) to select
3
4
1
2
)
3
37
1
2
3
4
5
6
7
8
9
10
11
12
13
14