Before Calling For Service (cont.)
There are no
creases left on
remove wrinkles from fabric.
garment after
Steam Fresh™
Garments have
static after
Reduce Static
Garments are
too damp or
selected.
too dry after
Reduce Static
Garments are not
Number of garments or load
uniformly damp
size not properly selected at the
after Easy Iron
beginning of the cycle.
Water drips
from door
during Steam
Cycle
Steam is not
visible during
Steam Cycle
Drum does not
turn during
Steam Cycle
Cannot see
steam vapor at
the beginning
of cycle
The display
shows
Odors remain
in clothing after
odor completely.
Steam Fresh™
Check Filter
light is on
full.
during the
drying cycle
TM
Flow Sense
indicator
many turns/restrictions.
shows four
bars during the
ductwork due to lint buildup or
drying cycle
debris.
restriction in the external dryer
venting.
option.
starting the cycle.
dryer door during steam operation. Some condensation
may drip out the bottom of the door.
However, condensation will normally form on the inside of
the dryer door if the steam system is operating normally.
once a minute.
option.
for a "
" item such as a comforter.
Press the Less Time button to reduce the indicated load
size.
normal cycle.
Instructions.
Dryer can be used in this condition, but drying times may
be longer.
system, the indicator will remain on for two hours after
the end of the cycle. Opening the door or pressing the
Power button will turn off the display.
TROUBLESHOOTING
TM
39