Adjusting Control Grip Height; Connecting Machine To Power Source - Tennant 1530 Manual De Operador Y Lista De Repuestos

ADJUSTING CONTROL GRIP HEIGHT

The machine has five control grip height settings.
To adjust, pull the console height trigger and lift or
lower the console to a comfortable operating height.
Release trigger to lock position (Figure 4).
FIG. 4

CONNECTING MACHINE TO POWER SOURCE

1. Connect the 23 m (75 ft) extension cord into the
machine's pigtail cord.
2. Plug the extension cord into a grounded wall outlet
(Figure 5).
Grounded
3 Hole Outlet
Ground Pin
FIG. 5
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of additional extension cords. Only use
manufacturer's extension cord equipped with
machine which has proper capacity and is
grounded.
Tennant 1530 (12- -02)
Home Find... Go To..
3. Attach the belt clip to the power cord (Figure 6).
FIG. 6
WARNING: Do Not Operate With Damaged
Power Cord. Do Not Modify Plug. Unplug power
Cord Before Servicing Machine.
If the supply cord is damaged or broken, it must
be replaced by the manufacturer or it's service
agent or a similarly qualified person in order to
avoid a hazard.
OPERATION
9