Lincar Milly 515SC Manual Del Usuario página 41

CONNECTION FOR EXHAUST FUMES BETWEEN STOVE AND CHIMNEY
•
This operation has to be done by technicians.
•
The equipment has the possibility to be connected in vertical or
back way for exhaust fumes.
Tubes are NOT included with the equipment.
Use only tubes for pellet stoves. Make sure the tubes are sealed with sealing lip, resistant
to high temperatures.
Instructions for vertical connection:
− Use a junction Ø80 for exhaust pellet fumes in "T" type , with a base
for condensation exhaust and cap. ( See the attached leaflet and Fig.
A1).
Unscrew the rear screws that fix the side and take it away sliding it
toward the rear part of the stove.
Now You can connect easily the exhaust tube to aspiration fan.
Make attention to wiring and electrical connections.
Unscrew the fix screw on the top and remove it.
− Insert the "T" into exhaust tube stove, ensuring that the 'coupling
involves an overlap of the seal of the "T" to the exhaust connection of
the stove as Fig. A.
− Complete the vertical connection between the "T " and the chimney
passing through the top hole.
− It's possible to employ a canopy silicone for high temperature
between the vertical tube and the top ( It's an aesthetic device to
complete the installation)
Replace the side screwing the fixing screws..
Fig.A
41/124
IT-GB-FR-ES mod. 515SC
Fig.A1