Maintenance And Cleaning; Cleaning To Be Carried Out By The User - Lincar Milly 515SC Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3 MAINTENANCE AND CLEANING

RESERVED TO USER

Cleaning to be carried out by the User

3.1
The frequency of the stove cleaning and maintenance is depending from pellet quality an
quantity. An high degree of humidity, ash, powder or chemicals adds inside the pellet
could increase the necessary cleaning and maintenance operations; so we recommend
again to employ a very high pellet quality
Burner Tank Cleaning : To obtain the best performance during stove's functioning,
EVERY DAY it's necessary to clean the burner tank. Remove the tank and empty it
from every residuals, clean all the holes on the bottom and replace it into the stove being
careful to the position of starting glow plug.
Ash Drawer cleaning
The ash drawer is placed under the foyer, open the
fire door to enter it.
Remove the ash drawer.
The ash drawer has to be emptied every day from
combustion residuals employing the glove. This
operation has to be done with cold stove.
Attention please to embers or hot pieces.
Insert again the ash drawer into its place and close
the fire door.
To forget to insert the ash drawer in its place it's
dangerous.
Ordinary Cleaning about combustion
room.. The combustion room has to be
checked to insure that air feed is regular.
The combustion room can be cleaned with a
vacuum cleaner. To scrape off the scale
from burner basket.
After having remove the burner basket to
scrape off the scale, replace it verifying that
the hole of big dimension has to be
correspondence with glow up tube.
Burner basket
Spark tube
58/124
IT-GB-FR-ES mod. 515SC
Fire Door
Ash Drawer

Publicidad

Tabla de contenido
loading

Tabla de contenido