Setting Up The Wireless System - Sony WAHT-SA20 Manual De Instrucciones

Note
• Do not connect the speaker cords supplied with
the Wireless Surround Kit to any of the speaker
jacks on your S-AIR main unit.
4
Connect the AC power cords
(mains leads).
Before connecting the AC power cords
(mains leads) of your S-AIR main unit
and the surround amplifier to wall
outlets (mains), make sure that all
speakers are connected.
8
US
Setting Up the Wireless
System
To use the wireless system, you need to set
up the surround amplifier and your S-AIR
main unit. Before setting, make sure that the
wireless adapters are correctly inserted in
the S-AIR main unit and surround amplifier.
Setting up the S-AIR main
unit
For details on using the S-AIR main unit,
refer to the operating instructions of the
S-AIR main unit.
1
Turn on the S-AIR main unit.
The system turns on.
2
Set up the S-AIR main unit so it is
ready for ID setting.
3
Select the ID for the S-AIR main
unit.
You can select any ID (A, B, or C).