Information And General Warnings; Information About The Instruction Manual; Guarantee And Responsibility - Riello RS 70/M Instrucciones De Instalación, Uso Y Mantenimiento

Information and general warnings

1
1.1

Information about the instruction manual

Introduction
The instruction manual supplied with the burner:
is an integral and essential part of the product and must not
➤
be separated from it; it must therefore be kept carefully for
any necessary consultation and must accompany the burn-
er even if it is transferred to another owner or user, or to
another system. If the manual is lost or damaged, another
copy must be requested from the Technical Assistance
Service of the area;
is designed for use by qualified personnel;
➤
offers important indications and instructions relating to the
➤
installation safety, start-up, use and maintenance of the
burner.
Symbols used in the manual
In some parts of the manual you will see triangular DANGER
signs. Pay great attention to these, as they indicate a situation
of potential danger.
GENERAL DANGERS
The dangers can be of 3 levels, as indicated below.
Maximum danger level!
This symbol indicates operations which, if
not carried out correctly, cause serious
DANGER
injury, death or long-term health risks.
This symbol indicates operations which, if
not carried out correctly, may cause serious
injury, death or long-term health risks.
WARNING
This symbol indicates operations which, if not
carried out correctly, may cause damage to
the machine and/or injury to people.
CAUTION
1.2

Guarantee and responsibility

guarantees its new products from the installation date, in
accordance with the regulations in force and/or the sales con-
tract. At the moment of the first start-up, check that the burner is
integral and complete.
Failure to observe the information given in this
manual, operating negligence, incorrect installa-
tion and carrying out of non authorised modifica-
WARNING
tions will result in the annulment by
guarantee that it supplies with the burner.
In particular, the rights to the guarantee and the responsibility will no
longer be valid, in the event of damage to things or injury to people,
if such damage/injury was due to any of the following causes:
incorrect installation, start-up, use and maintenance of the
➤
burner;
improper, incorrect or unreasonable use of the burner;
➤
intervention of unqualified personnel;
➤
carrying out of non authorised modifications on the equipment;
➤
use of the burner with safety devices that are faulty,
➤
incorrectly applied and/or not working;
installation of untested supplementary components on the
➤
burner;
DANGER
Other symbols
➤
Abbreviations used
Ch.
Fig.
Page
Sec.
Tab.
Delivery of the system and the instruction manual
When the system is delivered, it is important that:
➤ The instruction manual is consigned to the user by the sys-
tem manufacturer, with the recommendation to keep it in
the room where the heat generator is to be installed.
➤ The instruction manual shows:
the serial number of the burner;
the address and telephone number of the nearest Assis-
tance Centre;
➤ The system supplier must carefully inform the user about:
- the use of the system,
- any further tests that may be necessary before the sys-
tem is started up,
- maintenance and the need to have the system checked
at least once a year by the Manufacturer or another spe-
cialised technician.
To ensure a periodic check,
ing up of a Maintenance Contract. ➤
powering of the burner with unsuitable fuels;
➤
faults in the fuel power supply system;
➤
use of the burner even following an error and/or an irregular-
➤
ity;
repairs and/or overhauls incorrectly carried out;
➤
modification of the combustion chamber with inserts that
➤
prevent the regular development of the structurally estab-
lished flame;
of the
insufficient and inappropriate surveillance and care of those
➤
burner components most likely to be subject to wear and
tear;
use of non-original
➤
parts, kits, accessories and optionals;
force majeure.
➤
furthermore declines any and every responsibility
for the failure to observe the contents of this manual.
3
GB
DANGER: LIVE COMPONENTS
This symbol indicates operations which, if
not carried out correctly, lead to electric
shocks with lethal consequences.
ENVIRONMENTAL PROTECTION
This symbol gives indications for the use of
the machine with respect for the environ-
ment.
This symbol indicates a list.
Chapter
Figure
Page
Section
Table
recommends the draw-
components, including spare
6461