Setting Programmable Positions And Pairing Remote - Ashley M9X432 Manual Del Usuario

Setting Programmable Positions
and Pairing Remote
The original remote that comes in the box is already paired to the foundation. No further action is required.
In the event that the remote is not paired with the foundation, follow the steps below.
M9X4/M9X5 PAIRING REMOTE
STEP 1
Ensure to use the new batteries. Replace them
when needed.
STEP 2
Unplug the power cord from the power source.
If 9V batteries were installed in the power supply, remove them.
STEP 3
Press and hold HEAD and HOME
simultaneously until the blue backlights of
the remote control are off.
STEP 4
Plug the power cord back into the power source. You will hear a beep
sound in 2 seconds; the remote is then paired.
M9X6 PAIRING REMOTE
STEP 1
Ensure to use the new batteries. Replace
them when needed.
STEP 2
Unplug the power cord from the power source.
If 9V batteries were installed in the power supply, remove them.
STEP 3
Press and hold SELECT
button until the LCD
screen of the remote
control shows PAIR.
STEP 4
Plug the power cord back into the power source. You will hear a
beep sound in 2 seconds; the remote is then paired.
M9X4 M9X5
Customer Service Toll Free: 1-800-248-5988
—8—
SETTING PROGRAMMABLE POSITION
The M9X6 power bed has a programmable feature that allows
you to save two custom positions.
Please read all the instructions below before setting your custom
presets on the remote.
STEP 1
Adjust the head and foot to your
desired position.
STEP 2
Press and hold the LED on/off button
the LCD screen shows SAVE, and press picture programmable
buttons until you hear 2 beep sounds.
STEP 3
To adjust a saved position, repeat step 1 and 2 and the new
position will be saved.
SETTING REMOTE LOCK
The M9X6 power bed has a lock feature that allows you to lock
the remote. Read all the instructions below.
LOCK
Press and hold HOME and
SELECT buttons
simultaneously for about 5
seconds until the LCD screen
shows LOCK.
UNLOCK
Press and hold HOME and SELECT
seconds until the LOCK disappears on the LCD screen.
LOW BATTERY
The LCD screen will show LOW once
the batteries are in low power.
for about 5 seconds until
buttons for about 5