Parameters - A SYSTEMS DMP808 Manual Del Usuario

PARAMETERS

Function
Compressor / Limiter
Gate
Expander
Delay
4-band Equalizer
31-band Graphic EQ
Filters
Feedback Silencer
Automatic Level Control
Ducker
Signal Generator
Parameter
Compressor Threshold
Ratio
Limiter Threshold
Output Gain
Attack / Release
Threshold
Range
Attack / Hold / Release
Threshold
Ratio
Attack / Release
Delay Time (mS)
Delay Time (meters)
Delay Time (feet)
Temperature (C)
Temperature (F)
Type
Gain
Frequency
Q
Frequencies
Range
Q
Type
Gain
Frequency
Q
Threshold
Release Time
Gain
Frequency
Q
In Target
Below Target
Ratio
Increase Gain
Decrease Gain
Hold Time
Source
Threshold
Depth
Attack / Release
Sine Wave Frequencies
Sweep Wave Start/End Frequencies
Sweep Wave Hold Time
Signal Level Range
DMP808 / DMP808D
BPF, Notch, Peak, HPF, LPF, High Shelf, Low Shelf
HPF (6 dB, 12 dB, 18dB, 24dB), LPF (6 dB, 12 dB, 18dB, 24dB),
High Shelf, Low Shelf, Peak, APF, BPF, Notch
10 sec/dB to 300 sec/dB
40ms/dB to 1000ms/dB
1000ms/dB to 40ms/dB
Analog 1 to 8, EX 9 to 12, Network 1 to 8
25
Range
-50 dB to 0 dB
1:1 to 20:1
-50 dB to 0 dB
0 dB to 18 dB
1 ms to 8 seconds
-50 dB to 0 dB
-90 dB to 0 dB
1 ms to 8 seconds
-50 dB to 0 dB
1:1 to 20:1
1 ms to 8 seconds
0.0 to 680.0 ms
0.0 to 245.5
0.0 to 805.4
0° to 50°
32° to 122°
-18 dB to +18 dB
20 Hz to 20 kHz
0.1 to 10
20 Hz to 20 kHz
-12dB to +12dB
1.6 to 10
-18 dB to +18 dB
20 Hz to 20 kHz
0.1 to 10
-50 dB to 0 dB
-20 dB to 0 dB
20 Hz to 20 kHz
4.5 to 10
0 dB to -50 dB
-30 dB to 0 dB
1:5~20:1
0s to 10s
-50 dB to 0 dB
-80 dB to 0 dB
0.2s to 20s
20Hz to 20KHz
20Hz / 20KHz
50ms to 2000ms
-60dB to -10dB
English