Dynex DX-WEGRTR Guia Del Usuario página 45

Setting up your wireless router
6 If not already selected, select Obtain an IP address automatically and Obtain
DNS server address automatically, then click OK.
Your network adapter(s) are now configured for use with the router.
To manually configure network adapters in Windows 98SE or Me:
1 Right-click My Network Neighborhood, then select Properties from the list.
2 Select TCP/IP, then settings for your installed network adapter. You will see the
following window.
3 If Specify an IP address is selected, your router will need to be set up for a static IP
connection type. Write down the address information. You will need to enter this
information into the router.
• Write in the IP address and subnet mask from the IP Address tab.
• Click the Gateway tab. Write the gateway address down in the chart.
• Click the DNS Configuration tab. Write the DNS address(es) in the chart.
4 If not already selected, click Obtain IP address automatically in the IP Address
tab, then click OK.
5 Restart the computer. When the computer restarts, your network adapter(s) are now
configured for use with the router.
Set up the computer that is connected to the cable or DSL modem FIRST using these steps.
You can also use these steps to add computers to your router after the router has been set up
to connect to the Internet.
To manually configure network adapters in Mac OS X:
1 Click the System Preferences icon. The System Preferences menu opens.
45