SP6768-1 PROTEAM 4 GALLON
Cleaning and Disinfecting the
Wet/Dry Vacuum
To keep your Wet/Dry Vacuum looking
its best, clean the outside with a cloth
dampened with warm water and mild
soap (Figure H).
To clean the tank:
1. Dump out debris.
2. Wash tank thoroughly with warm
water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed
(e.g., waste water pick up), the tank
should be disinfected.
To disinfect the tank:
1. Pour 1 gallon of water and 1 teaspoon of chlorine bleach into the tank.
2. Let solution stand for 20 minutes, carefully swishing every few minutes, making
sure to wet all inside surfaces of the tank.
3. Empty tank after 20 minutes. Rinse with water until bleach smell is gone. Allow
tank to dry completely before sealing the motor on the tank.
WARNING - To assure product SAFETY and RELIABILITY, repairs and adjustments
!
should be performed by an Authorized Service Centers, always using ProTeam
replacement parts.
14
12/28/11
MAINTENANCE
11:17 AM
Page 14
(Continued)
Dampened
Cloth
Vacuum Assembly
Figure H
ProTeam