9.1 Operating with 2 Trains
Two trains can be operated independently of each
other on the same layout. To do this, you must set
one train and remote controller to switch setting
G-G (1) and the second train and remote controller
to H-H (2). The switch settings for the train and
remote controller must agree with each other!
1
G - G
2
H - H
G - H
H - G
G - H
H - G
10. Trouble Running the Train
• If the train does not run, check to make sure
that the rechargeable battery for the train is
charged up. If necessary, charge up the rechar-
geable battery for the train. If the rechargeable
battery for the train is charged up and the train
still does not react, check the batteries for the
remote controller. If necessary, replace the
batteries for the remote controller.
• If the train runs noticeably slower or comes
to halt while you are playing with it, charge up
the rechargeable battery. Pay attention to the
automatic shutoff time! (See section 9)
• If the train is damaged, it may not be used
anymore. If another car or powered car is
damaged, take it out of the train and do not use
it anymore.
• If the range of the remote controller decreases,
then the batteries for the remote controller
need to be replaced.
11. Cleaning and Maintenance
• Check to see if hair or dirt gets on the axles on
the train and remove this hair or dirt from the
axles with the help of a pair or tweezers so that
the train runs correctly.
• The train can be wiped with a dry, lint-free cloth.
• Recharge the battery no later than 6 months
after not being used in order to avoid deep
discharge. Deep discharges damage the battery,
reduce the performance, and shorten the possi-
ble running time for the unit.
• The traction tire on the powered axle can
be replaced if necessary. The traction tire is
available under item number E284 219.
E284 219
17