Tabla de contenido
Publicidad
Suunto EON Steel
You can set a bearing lock to help you orientate yourself underwater and ensure you maintain
your direction of travel. For example, you can set a bearing lock for the direction to the reef
before leaving the boat.
You can reset the bearing lock at any time, but you can only clear a bearing lock while at the
surface.
To set a bearing lock:
1. Press the middle button to change to the compass view.
2. Hold your Suunto EON Steel in level in front of you, with the top pointing in the direction to
your target.
3. Keep the lower button pressed until you see the Bearing locked notification.
Once you have a bearing locked, the lock position is indicated on the compass rose, as
shown below.
Below your heading (large number in center of compass), you also see the relative difference
between your bearing and your heading. So, for instance, when you want to travel in the
exact direction of your bearing, the lower number should be 0°.
If you want to set a new bearing lock, just repeat the same procedure above. Each bearing
lock is recorded in your dive log with a time stamp.
To clear the bearing lock from your compass view, you need to return to the surface.
To clear a bearing lock:
1. While in surface state, keep the middle button pressed to enter the main menu.
2. Scroll to GENERAL with the upper or lower buttons and press the middle button.
3. Press the middle button to enter Compass.
4. Select Clear bearing with the middle button.
5. Keep the middle button pressed to exit.
3.7. Personaliza modos de inmersión con DM5
Puedes personalizar vistas y funciones de Suunto EON Steel con Suunto DM5. Crea hasta 10
modos de inmersión distintos con hasta cuatro vistas personalizadas cada uno.
Mira el vídeo en YouTube.
Para personalizar Suunto EON Steel:
1. Descarga e instala Suunto DM5 en http://www.suunto.com/DM5.
2. Conecta tu Suunto EON Steel al ordenador con el cable USB.
3. En la ventana de dispositivos, selecciona Suunto EON Steel.
4. Selecciona la pestaña Customization (Personalización). Puedes crear modos nuevos de
inmersión y modificar los ya existentes.
NOTA: Al crear o modificar modos de inmersión deberás sincronizar los cambios con tu
Suunto EON Steel antes de desconectar el cable USB para guardar los cambios en tu
dispositivo.
15
Publicidad
Tabla de contenido
