Introduction And Safety - Armor All AA6BP2 Manual Del Usuario

INTRODUCTION & SAFETY
READ BEFORE USING
Many automobiles use paint finishes that require a softer, plusher bonnet than the terrycloth bonnet included
with this orbital polisher.
Use the terrycloth bonnet included with this orbital polisher only to apply wax and related chemicals
to a clean paint surface. Do not use it to remove wax or to buff a waxed surface, even if it has been
washed. Doing so can cause paint damage.
For buffing waxed surfaces, use the clean microfiber bonnet included.
INTRODUCTION
®
This ArmorAll Random Orbit Polisher is optimally designed for polishing, waxing, and buffing dry, clean,
painted automotive surfaces. Equipped with a durable 0.4 Amp motor, this orbital polisher delivers 3500 orbits
per minute (RPM) in a random circular motion, which is similar to yet exceeds the motion of a hand polish.
This instruction manual is intended for your benefit. Please read, understand, and follow the safety,
installation, maintenance, and troubleshooting sections to ensure safety, prevent property damage, and lead to
years of satisfied use.
The contents of this manual are based on the latest information available at the time of publication. The
manufacturer reserves the right to make product changes at any time without notice.
SAFETY INSTRUCTIONS AND WARNINGS
WARNING:
Read and understand all instructions before using this orbital polisher. Failure to
comply with the instructions may result in serious personal injury and/or property damage.
Safety is a combination of common sense, staying alert and knowing how your appliance works. Use this
product only as described in this manual. To reduce the risk of personal injury, damage to your orbital polisher,
and/or property damage, use only recommended accessories.
WARNING:
Wear Eye Protection. The operation of any orbital polisher can result in foreign objects
being thrown into your eyes, which can result in severe eye damage. Before operating the tool, always wear
safety goggles or safety glasses marked to comply with ANSI Z87.1 (or in Canada, CSA Z94.3).
WARNING:
Do not operate this orbital polisher if it has been damaged during transit or due
to handling or misuse. Do not operate it until the fault has been corrected or the broken parts have been
replaced. Failure to do so may result in serious personal injury or property damage.
WARNING:
This product can expose you to chemicals including Phthalates, which are known to the
State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
Avoid inhaling vapors and dust. Wash hands after use.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
When using an electrical appliance, basic precautions should always be followed including the safety
rules on the following pages.
3