Sanus MF215 Manual Del Usuario página 20

Manage Cables
Option A:
Thread cable through channels the secure with cable plates and plate screws .
31 32
Option B:
Install cable plates with plate screws . Thread cable ties through end holes in plates . Arrange cables then secure them with
32 33
31 31
the cable ties .
33
NOTE: Pull the arm to its full extension before routing the cables through the channels, then loosely route the cables. This will give the cables
enough slack to prevent excess tension when adjusting the position of the arm.
A B
31
OR
32
31
33
33
32
20